The metal cut can be produce by both these methods with their respective equipment. With these processes there is no material waste because the cut is produced by pressure.
The CNC shearing is a cold slitting process for metal sheets. It is used to reduce large metal sheets into smaller ones for stamping use.
The cut is produced by placing the metal sheet into two arms with blades on it edges. One of these arms is moving up and down applying pressure to the metal sheet till it divides into two pieces.
The CNC shearing is a cold slitting process for metal sheets. It is used to reduce large metal sheets into smaller ones for stamping use.
The cut is produced by placing the metal sheet into two arms with blades on it edges. One of these arms is moving up and down applying pressure to the metal sheet till it divides into two pieces.
In the CNC Punching the cut is not longitudinal, it has a specific design. It has not blades but a punch for mobile part and die with design to keep the sheet in place.
It applies pressure over the punch that can cut the material easily.
The punching offers great accuracy and because of it versatility and ease of use is a common process in the industry.
© Esymo metal 2021, All rights reserved. Web Page made by Grupo Linared Informática | Disclaimer
